All Geared Head Lathe Machine
KMT deals with High Precision, High Production, All Geared Head SS & Sc Lathe equipped with Norton Gear Box, having working accuracy to Grade-1 standard, available with Gap in the Following series & having the main dimensional specifications as under:
|
Size |
Distance |
Width of bed |
Height of centre |
Spindle Bore |
|
7’ |
1000MM |
325MM |
267MM |
54MM |
|
9’ |
1500MM |
325MM |
267MM |
54MM |
|
10’ |
2000MM |
325MM |
267MM |
54MM |
|
12’ |
2500MM |
325MM |
267MM |
54MM |
|
7’ |
1000MM |
375MM |
300MM |
80MM |
|
9’ |
1500MM |
375MM |
300MM |
80MM |
|
10’6” |
2000MM |
375MM |
300MM |
80MM |
|
12’6” |
2500MM |
375MM |
300MM |
80MM |
|
14’ |
3000MM |
375MM |
300MM |
80MM |
|
8’1/2’ |
1500MM |
460MM |
400MM |
90MM |
|
10’ 1/2’ |
2000MM |
460MM |
400MM |
90MM |
|
12’ |
2500MM |
460MM |
400MM |
90MM |
|
14’ |
3000MM |
460MM |
400MM |
90MM |
|
16’ |
3500MM |
460MM |
400MM |
90MM |
|
18’ |
4000MM |
460MM |
400MM |
90MM |
|
20’ |
4500MM |
460MM |
400MM |
90MM |
Centre height 267 mm / 300mm
Main Spindle
- Type of spindle nose
- A2-6
- Spindle nose taper
- MT-6
- Spindle adaptor morse
- MT-4
- Taper spindle speeds
- 12 [30, 43, 55, 85, 115, 160, 210, 285, 400, 545, 785, 1060RPM]} Centre height 267mm
- Taper spindle speeds
- 12 [20, 28, 38, 55, 75, 105, 140,} 190,265,365,525,705RMP} Centre height 300mm
- Spindle mounting on
- Taper rotter bearings
Tail Stock Spindle
- Diamter
- 6.3mm/Travel:180mm/Morse Taper:MT-4
- Landing Screw Dia/threads
- 38mm/4TPI
Feeds Nos of feeds /range
- For fully matric
- 17/0.5mm to 15mm/pitch
- Nortor gear box inch
- 40/2 to 60TPI
Feeds Nos of feeds /range
- For fully longitudinal
- 40/0,066 to 2mm/rev ,of spindle
- Norton gear box cross
- 40/0,0165 to 5mm/rev ,of spindle
Center heighte 400mm
Main Spindle
- Type Of Spindle nose
- Threated TPI
- Spindle nose taper
- MT-5
- Spindle adaptor morse
- MT-5
- Spindle speeds
- 9 nos
- RPM/Range
- 30-720 RPM
- Spindle mounting on
- Taper rotter bearings 32224 and 32222 ZKL Make
Tail Stock Spindle
- Diameter
- 80mm dia
- Lending screw dia threade
- 500mm TPI
Threads
- Nos of threads Range of fully matric
- 1 to 14 mm
- Nortor Gear box inch
- 1 to 30 TPI
Feeds Nos of feeds
- Range for fully longitudinal
- 30 nos
- Range of longitudinal feed
- 0.05 -28mm
- Range of Transverse Feed
- 0.025-1_4mm
Standard Accessories
Face plate, carrier plate spiash guard steady rest,follow rest coolant system with littings, electrical,motor panel bored ,wiring push button switches ,v belts and tittings ,Electrical switch shift and chip guard, 4 jaws dog chuck with chuck plate ,3jaws true chuck with chuck plate centre adaptor Dead centres [MT4] 2 nos, Tool post spanner motor pulley Thread dial indicator change gear set 1 {for metric and inch both}
Extra Accessories
Tapper turing Attachment, quick change tool post Rear tool post DRO units food break recving centre machine lamp